Lynx One 24/96 Audio MIDI Interface NL

Detaljeret Beskrivelse

· Two 24-bit Analog Inputs

· Two 24-bit Analog Outputs

· +4 dBu or �10 dBV Balanced or Unbalanced

· 24-bit/96 kHz AES/EBU or S/PDIF I/O

· Two Low-Latency MIDI Ports

· Low-jitter PLL Sample Clock

· Extensive Synchronization Capabilities

· Multiple Card Operation

· Independent 4-channel Operation

· Windows 95/98/ME MME, DirectX & ASIO Drivers

· Windows NT/2000/XP MME Drivers

· Macintosh ASIO Driver

· Mixer Application

· Completely Software Controllable

· Six-foot Balanced Audio Cable Set

· Two-foot MIDI/Clock Cable Set

· Half-size PCI Card

Representing a new level in integration and professional capabilities, LynxONE is the perfect "front-end" for any studio quality audio or MIDI workstation. Whether an application requires uncompromising analog I/O, bit-perfect digital I/O, or 32 channels of low-latency MIDI, LynxONE is up to the task. LynxONE's compatibility with all popular Windows based audio editing and MIDI sequencing software allows users to choose their own working environments. Applications include critical audio recording and editing, CD mastering, restoration, audio for video, music composition, and MIDI sequencing.

The Vision

LynxONE� was born from the desire to create a new standard in interface hardware by combining the latest technology with proven design theory and stable drivers for multiple operating systems. The result is a product that utilizes the latest generation of A/D and D/A converters, high-density Field Programmable Gate Arrays (FPGA), and other support circuitry to offer exceptional performance and integration at a good value. Unlike other multi-function cards, the performance of each component of the LynxONE does not suffer, but exceeds that of a single function analog, digital or MIDI device.

Pristine Analog I/O

The Lynx engineering team has utilized its years of experience designing low-noise analog audio circuitry in the design of the LynxONE's analog section - a task that is especially critical in a 24-bit system. Through careful scrutiny of every component in the analog signal path, LynxONE delivers exceptionally low-noise and distortion levels that rival the performance of studio equipment costing thousands more.

Based on the premise that fewer potential noise sources are better, the analog signal chain is relatively simple. It consists of a minimal number of surface-mount, low-noise active components and precision resistors. Its measured noise level complements the excellent characteristics of the 24-bit delta-sigma A/D and D/A converters.

Differential amplifiers on the analog inputs and cross-coupled electronically balanced line drivers on the outputs provide high rejection of common mode RF and power line noise that is picked up on connected cables, which is especially important in computer-based studios. The robust outputs are capable of driving the excessive capacitance of long cables and 600-ohm loads. Both balanced and unbalanced connections are supported.

Selection of either +4 dBu or -10 dBV nominal levels is accomplished through software control of gold-contact relays. Lower cost analog FET-based switching methods were not used due to their inherent distortion. Needless to say, manual installation of circuit board jumpers to select trim levels is not required. In either trim setting, a generous 16 dB of headroom is provided to easily handle musical peaks and to further boost the signal level above the studio noise floor.

Crucial to low-noise operation in a computer environment, is the rejection of computer related noises. LynxONE incorporates innovative PCB layout and circuit design techniques to combat these unwanted signals. Because of this, LynxONE offers 103dB of "real-world" dynamic range when installed in a typical computer.