DISC TC Electronic Konnekt 48 Audio Interface & Remote

Dette produkt kan ikke købes i øjeblikket

DISC TC Electronic Konnekt 48 Audio Interface & Remote Oversigt

Denne beskrivelse er oversat fra engelsk - Se den originale udgave her

Studio Konnekt 48 is a pro quality audio interface with IMPACT II� preamps and built-in DSP ranging from channel strips and a reverb, to speaker control and bass management. Studio Konnekt 48 ships with a multi-functional remote for mixer control, speaker select and a built-in talkback microphone allowing quick and easy access of parameters.

Produkt Ref: 7390

Detaljeret Beskrivelse

Se den fulde beskrivelse

Studio Konnekt 48 houses the most extensive feature set yet in the Konnekt series.

A total of 48 I/O with four Impact II� mic preamps and use of 12 analog inputs and 12 analog outputs simultaneously enables users to record all sources at once, monitoring input signals with a high resolution meter. The main XLR outputs are analog but at the same time they are digitally controlled, combining the best possible analog quality with the flexibility and precision of digital control. The two headphone outputs have individual level control and source, allowing individual mixes for each.

Studio Konnekt 48 features a 24/8 channel flexible digital mixer with total recall and DSP effects insert points, giving users zero compromise when it comes to routing options. The mixer has 48-bit double precision summing on all mix busses, 56-bit internal processing and each of the mixer outputs can be routed to any physical output.

Studio Konnekt 48 features support for surround systems at an unprecedented level in an audio interface. The speaker management section is based on AIR� technology, and supports three speaker sets and enables users to set individual speaker level and delay in 0.1 steps. This will assure perfect level alignment between speakers and allows the user to compensate for less-than-optimal speaker placement. Part of the speaker management section is the integrated bass management with selectable filters and frequency crossover points.

The included Studio Kontrol desktop remote has a high resolution LED light ring to visualize parameter values and a compact design, ensuring a smooth and fast workflow when working with Studio Konnekt 48.

Studio Konnekt 48 is equipped with world-class DSP effects transferred directly from TCs most renowned products, such as Fabrik C, Fabrik R, ResFilter, Assimilator Konnekt, Integrator.

Minimum system requirementsMac OSX 1.4

� PowerPC (1 GHz or faster) or Intel CPU

� 512 MB RAM

� FireWire (IEEE 1394) port*

� OS X 10.4.10

Windows XP SP2 or Vista x32

� Pentium 4, 1.6 GHz or faster

� 512 MB RAM

� FireWire (IEEE 1394) port*

� Windows XP

  • We recommend running Konnekts on a dedicated FireWire bus.

If your computer has one or more FireWire connections on the chassis they will typically run on the same FireWire bus. You may connect the Konnekt to one of these. If you intend to run more FireWire devices simultaneously, such as e.g. an external hard drive, we recommend running this device on a separate bus.

This would typically be on an installed FireWire PCI card. Note that such a FireWire PCI card typically has 3 ports but these also operate on a single bus.