Line 6 StageSource L2t

Full Description

Powerful. Portable. Versatile

PA, monitor or backline speaker- the Line 6 L2t StageSource will handle any with ease. 800w means you’ll never be short of volume in any setup and the six SmartSpeaker modes make changing application a breeze; from monitor to standalone speaker in a matter of seconds. The clever design incorporates Virtual Tilt-back which automatically optimises your sound based on positioning- if laid on its side, monitor mode will be activated, for example. Connecting to other speakers is also made easy with a Line 6 Link cable. This intuitive design makes the L2t perfect for anyone who needs a speaker that can fit any task.

Acoustic Modelling

An ideal busking companion, the acoustic modelling technology gives a deeper, richer tone to any acoustic guitar. Gone are the days of thin, lifeless, ‘tinny’ acoustic sounds, the L2t guarantees a rich, rounded tone whenever used. Couple this with the super effective feedback suppression and the L2t becomes a very reliable ‘set and leave’ speaker and leaves you free of worry about potential squeals mid-performance.

Features

• High performance 2-way, bi-amped 800+ Watt performance
• Smart Speaker Modes for great live sound in any live sound situation
• On-board Accelerometer and Pole-mount sensors
• Virtual Tilt-back projects speaker’s output upwards in backline mode
• L6 LINK multi-channel digital audio networking for multi-speaker setups
• Multi-channel mixer including 3-band EQ with sweepable mids
• Built-in modulation effects and reverb
• 12-band feedback suppression
• Acoustic guitar modeling for incredible live acoustic guitar tone
• When laid on its side, can be positioned so the speakers fire at an upward angle of 30°, 60°, or 90°
• Dual-braced tour-grade plywood enclosure
• Full screen backed steel grille
• Retractable handle for easy portability
• Four M10 suspension points and one M10 pullback point

Specifications

• Acoustical
  • System Type: 10", 2-way, bi?amplified loudspeaker system
  • Frequency Range (-10 dB): 44Hz to 19kHz, (Reference/P.A. Speaker Mode, free?field)
  • Frequency Response (±3 dB): 51Hz to 18kHz, (Reference/P.A. Speaker Mode, free?field)
  • Maximum SPL Output: 128dB peak @ 1 meter (unweighted, measured indoors with music program material)
  • Coverage Pattern (?6dB): 100? horizontal x 50? vertical
  • Directivity Factor (Q): 9.2 (averaged 1kHz to 16kHz)
  • Directivity Index (DI): 9.6dB (averaged 1kHz to 16kHz)
  • Crossover Frequencies: LF to HF Crossover ? variable, 2.2kHz to 7.0kHz (Speaker Mode dependent)
  • Low Frequency Transducer: 10” extended range woofer, 2” diameter voice coil, 4? impedance
  • High Frequency Transducer: 1” exit compression driver, 1.4” diameter voice coil and diaphragm, 8? impedance

• Electrical – Side Panel
  • Input Type: 2x mic/instrument XLR?1/4”, balanced
  • Input Impedance (each input): 2.63 k? balanced (Pad = 0dB), 23.7 k? balanced (Pad = 20dB)
  • Gain Range (each input): ?infinity to +57dB (Pad = 0dB); ?infinity to +37dB (Pad = 20dB)
  • Max Input Level: +25dBu (Gain at minimum ‘on’ position, 20dB pad on)
  • Controls: 2x Gain, 20dB Pad, LF Level, MF Freq & Level, HF Level, Mod Level, Reverb Level, Feedback Suppression On/Off/Mode, 1x Dual Mono/Stereo Link Mode, Acoustic Modelling Amount On/Off
  • Indicators: 2x Signal Present/Clip, 2x Feedback Suppression On/Off/Mode, 1x Acoustic Modelling On/Off

• Electrical – Rear Panel
  • Line level XLR 1/4'', balanced
    • Input Impedance: 100k balanced
    • Max Input Levels: +20dBu
    • Output Type: Balanced Loop Thru XLR
    • Output Impedance: Source?dependent
  • Stereo RCA, unbalanced
    • Input Impedance: 20 k? balanced
    • Max Input Levels: +16dBV
    • Output Type: Balanced Mix Out XLR
    • Output Impedance: 680? balanced
  • L6 LINK XLR
    • Input Impedance: N/A
    • Max Input Levels: N/A
    • Output Type: L6 LINK XLR
    • Output Impedance: N/A
  • Onset of Limiting: +6dBu input (Reference/P.A. Speaker Mode, Master Level control at centre?detent), ?6dBu input (Reference/P.A. Speaker Mode, Master Level control at maximum)
  • Controls: Feedback Suppression On/Off/Mode, Master Level, Speaker Mode
  • Indicators: Signal Present/Clip, Feedback Suppression On/Off/Mode, Limit, 6x Speaker Mode, L6 LINK Status

• Digital Signal Processing
  • Speaker Modes: Reference/P.A., Playback, Floor Monitor, Keyboards, Acoustic Guitar, Electric Guitar
  • On board Effects: Reverb, Modulation, Feedback Suppression, Acoustic Modelling
  • Transducer Protection: Excursion limiting, thermal limiting
  • Digital Networking: L6 LINK intelligent speaker networking system
  • Sensors: Speaker orientation, pole sensor, power amp temperature, power supply temperature

• Power Amplification and Supply
  • HF
    • Power Amplifier Type: Class AB
    • Peak Output Power: 175 Watts
  • LF
    • Power Amplifier Type: Class D
    • Peak Output Power: 655 Watts
  • Power Supply Voltage Range: 100 ? 240 VAC, ± 10 , 50/60Hz , automatic voltage selection
  • Power Consumption: 250 watts (1/8th power)
  • Cooling: Digitally controlled, variable?speed 50 mm fan
  • Protection: Output overcurrent, overtemperature, DC fault

• Mechanical
  • Enclosure: 15 mm enclosure, 18 mm baffle, multi?ply hardwood, textured black paint, bass reflex design
  • Floor Monitor Upward Angle: 60? using kickstands, 30? using handle
  • Suspension Points: M10 x 1.5 threaded inserts, qty: 4
  • Pullback Point: M10 x 1.5 threaded insert, qty: 1
  • Grille: 18?gauge perforated steel, black powder coat finish
  • Pole Cup: 35 mm pole cup with sensor
  • Dimensions: 23.75” (603 mm) x 12.25” (312 mm) x 12.25” (312 mm)
  • Weight: 39.1 lb (17.7 kg)