Drawmer 1970 Dual FET Compressor and Pre-Amp
Key Features
- Dual FET compressor and pre-amp with phantom power and switchable mic impedance
- Two 'THAT Corporation' ultra-clean mic pre's with 66dB
- Controls include threshold, attack & release, with 8 LED GR Metering of each band
- Use as two mono tracking compressors or stereo bus compressor
Drawmer 1970 Dual FET Compressor and Pre-Amp Overview
With a feature set similar to the Drawmer 1960, the control layout feels instantly familiar to Drawmer users. One feature improved for the 1970 is a fine-tuned EQ, offering a highly accurate response to user changes. The 1970 uses the latest 'That Corporation' technology to provide two ultra-transparent microphone preamps. These help create precise recordings that are set up perfectly for further processing post 1970. Each channel is capable of a huge 66dB of gain, which is ideal for a range of sources and microphone types. Phase reverse is also included.
Whether you're tracking instruments via the DI input or recording vocals through the ultra-clean mic pre's, the 1970 is packed with features to create professional recordings.
Product Ref: 153715
Full Description
View Full DescriptionFeatures
- Two ‘THAT Corporation’ ultra clean mic pre's with 66dB of gain with phantom power and switchable mic impedance for accurate mic matching
- Separate Line & Mic input XLR's
- 1 pro quality instrument DI input with low and high EQ.
- Can be used as 2 mono tracking compressors or 1 stereo buss compressor (avoiding image shifting) via the class leading comprehensive linking facilities.
- FETs can be bypassed altogether to provide ultra clean outputs.
- Standard controls such as Threshold, Ratio, Attack & Release, with 8 LED GR Metering on each band
- Rear panel Side-chain insert points provide even further control.
- ‘Big’ and 'Air' Modes Help to preserve the very deep lows and enhance the sparkling highs
- Variable Wet/Dry Mix plus Output Gain knobs on both channels give a ‘Parallel Compression’ function without the need for external mixing devices, providing complete and effortless control over the amount of compressions used and output levels
- Two backlit Analogue V.U. Meters with Switchable +10dB rescale mode. Time delay relays on outputs for clean power up/down.
- Internal Low Hum Toroidal Linear Power Supply with Voltage Selector Switch.
- Classic Drawmer build quality with rugged steal chassis and aluminium front panel
- Designed and Handmade by Drawmer in the UK.
Specifications
- Input:
- Impedance: 20k Ohms or greater
- Maximum Input Level: +21dBu
- Output:
- Impedance: 100 Ohms
- Maximum Output Level: +21dBu into 10k Ohms Load
- Frequency response: 20Hz to 20kHz +/-0.5dB
- Crosstalk: less than -75dB @ 1kHz
- Noise at unity gain: 20Hz - 20kHz, greater than 93dB
- % Distortion (THD & NOISE) @ 1kHz:
- 0dB (ref +4) 0.01%
- 10dB (ref +4) 0.01%
- Mic EIN: -130dB
- Power requirements: 230Volt or 115V at 50-60hZ, 630VA
- Fuse rating:
- T250mA for 230Volt,
- T500mA for 115Volt
- Conforming to IEC 127-2
- Fuse type: 20mm x 5mm, Class 3 Timed-Blo, 250Volt working
- Case size: 482mm (W) x 88mm (H) x 270mm (D)
- Weight: 4.2 kg
- Product code: DRAW-1970