Music Gear News
Choosing Your Guitar's Tonewood
An acoustic guitar can be made from solid sheets of wood on the top, back and sides. These are often the most expensive guitars. The top panel is the one that carries the most vibrations from the strings, so you'll often find guitars with a solid top but laminate back and sides. Solid wood has an uninterrupted grain pattern which makes it vibrate better than laminate, which will have a thin top layer of wood.
Electric guitars can either have a solidbody, a block of shaped solid wood or a hollowbody, which produces a smooth tone with a greater acoustic amplification, which is why they're sometimes called 'semi-acoustic'. Semi-hollowbody guitars have space where the sound can resonate, either by adding blocks of wood to a hollowbody or creating chambers in a solidbody model.
The quality of the wood can make all the difference if you're struggling to narrow your choice down. Go for a guitar that uses high-quality wood - one that's not likely to have 'dead' spots or areas where the sound will be dampened.
Type of Wood
There are many types of tonewoods used, we'll run through some of the most popular. If you can't physically try the guitar before you buy, this guide can help you to make an informed decision.
Maple is commonly used on necks because it's resistant to humidity variations that can warp the wood of your electric guitar. Loud projection and very bright, maple-bodied guitars are ideal for Jazz styles.
Mahogany has a warm sound that improves with time, great for players who desire plenty of sustain. Found on the bodies of many Gibson and PRS Guitars and also produces a warm sound when used as the neck tonewood.
Basswood, similar to Mahogany but just a touch brighter.
Koa, a little less brighter than maple, becomes warmer as it's played. Koa originates from Hawaii and is therefore highly sought-after. Taylor have a series of acoustic guitars that feature this tonewood.
Bubinga is sometimes called African rosewood because of its similarity to rosewood, although it's less porous. Often overlooked, it's one of the best value tonewoods around.
Ash is bright-sounding and relatively light, typical with Fender Telecaster models.
Alder is light with a warm and bright tone. Its tonal distribution tends to be more even than Ash. Popular on many Fender Stratocaster models.
Walnut is a hard wood which sounds similar to Koa, it's a fairly new wood in relation to maple or mahogany but carries characteristics of both, its sound is inbetween.
Spruce can be a great all-rounder but especially the thing for fingerpickers. Spruce tops come in a few origins - Sitka and Engelmann are the most common, capable of a variety of tones.
Rosewood is like spruce, it's great for all playing styles and has a classic tone that will work for years to come. Seen on many fretboards and a few acoustics, rosewood is very rarely found in solidbody electric guitars.
Sapele is another all-purpose tonewood, a real mahogany doppelganger in both sound and look.
Cedar is a softwood usually found on classical guitars, it responds sensitively to delicate playing, and can pick up nuances well.
Posted on 11 Jul 2013 12:29 to category : Tips and advice
Related Music News
Gear4music social media competitions | terms and conditions of entry
Update available to improve performance and fix bugs.
Shure recently discussed how guitarists can achieve great results when recording at home or in a small project studio. We took a look and picked out our favourite points.
Recreate the Brazilian carnival atmosphere at your World Cup party with our Samba instruments.
Some people could find the prospect of recording an electric guitar quite daunting, but musicians and engineers in fact have many options open to them.
Musicians who record at home to produce demos or professional quality recordings can build up a vast array of equipment to come up with their ideal sound. However, it is not just the instruments themselves that can determine how a recording turns out, as the engineering and production can potentially make or break a track.
Recent Music News
Here at Gear4music we have a great relationship with Zildjian Cymbals and this year we were lucky enough to be invited to the factory and headquarters over in Norwell, Massachusetts, USA.
The new HeadRush Looperboard offers both looping and creative tools, making it more akin to a complete production device in a box. Welcome to the future of looping performance.
Have you entered yet? Win a MV88+ Video Kit from Shure, worth nearly £200! Competition closes Tuesday 16th April, so don't miss out.
The 2019 Record Store Day is a collaboration of over 200 independent record shops across the UK on the 13th April. To celebrate, we've put together some fantastic bundles to get you started on your vinyl journey.
Looking to get started in music? You've found the right place. Native Instruments' newest additions are the perfect tools to kick start your creativity. Read more in our 2019 roundup guide.
Omnisphere has been updated to version 2.6. This flagship software now features even more creative tools and support for over 65 hardware synths!